Office Address
123/A, Miranda City Likaoli Prikano, Dope
Phone Number
+0989 7876 9865 9
+(090) 8765 86543 85
Email Address
info@example.com
example.mail@hum.com
123/A, Miranda City Likaoli Prikano, Dope
+0989 7876 9865 9
+(090) 8765 86543 85
info@example.com
example.mail@hum.com
Toggle presses are used for operations requiring maximum development of press force at the end of the ram stroke, such as assembly, punching, riveting, gluing.
Toggle presses generate their nominal force only at the end of the stroke, i.e. at bottom dead centre.
The toggle mechanism enables the user to achieve high press operating pressure with relatively little physical effort (approximately 150 N).
We offer three variants of toggle presses: the EP and APK series with round ram and the VK series with square ram.
The presses can be equipped with various optional accessories, such as: HS return stroke lock, TB table bore, Z stroke counter, DP micrometric stroke setting.
EP series, round ram, forces from 5.0 kN to 12.0 kN, strokes from 40 mm to 60 mm
APK series, round ram, forces from 15.0 kN to 30.0 kN, strokes from 30 mm to 60 mm
VK series, square ram, forces from 5.0 kN to 30.0 kN, strokes from 30 mm to 60 mm
Round ram, forces from 5.0 kN to 12.0 kN
Strokes from 40 mm to 60 mm
Round ram, forces from 15.0 kN to 30.0 kN
Strokes from 30 mm to 60 mm
Square ram, forces from 5.0 kN to 30.0 kN
Strokes from 30 mm to 60 mm
PNEUMATIC TOGGLE PRESSES
Different models of pneumatic toggle presses are available for applications where manual presses do not meet the needs of assembly, punching, riveting, gluing and other operations.
APK series, round ram, forces from 5.0 kN to 60.0 kN, strokes from 35 mm to 40 mm.
VKL square ram, forces from 5.0 kN to 60.0 kN, strokes from 35 mm to 40 mm.
Round rod forces from 5.0 kN to 60.0 kN.
Strokes from 35 mm to 40 mm.
Square rod forces from 5.0 kN to 60.0 Kn.
Strokes from 35 mm to 40 mm.
DIRECT-ACTING PNEUMATIC PRESSES
Our DA series direct-acting pneumatic presses are equipped as standard with an innovative, precise and easy-to-use system for accurate stroke setting.
They are divided into two groups: DA and XL – DA models provide more space (throat) for large workpieces.
DA series direct-acting pneumatic presses, round ram, forces from 1.5 kN to 56.0 kN, strokes from 40 mm to 120 mm.
HYDROPNEUMATIC PRESSES
HP hydropneumatic presses run on compressed air and activate the hydraulic power stroke automatically.
The fast pneumatic stroke brings the part to be marked into proximity at high speed and low power, whereas the hydraulic power stroke starts automatically as soon as the cylinder meets a certain level of resistance.
HP series hydro-pneumatic presses, forces from 50.0 kN to 100.0 kN, stroke 50 mm
Pneumatic direct round rod presses, forces from 1.5 kN to 56.0 kN.
Strokes from 40 mm to 120 mm.
Hydro-pneumatic presses forces from 50.0 kN to 100.0 kN stroke 50 mm.
FIRST, CONSULTANTS; THEN, SUPPLIERS
We listen carefully to your marking needs and recommend the marking machines that suit them best.